Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!URIMVS.BITNET!PHR140
From: PHR140@URIMVS.BITNET ("Ray Courtois")
Newsgroups: comp.sys.atari.8bit
Subject: Re: digitizing...
Message-ID: <8808011956.AA13722@ucbvax.berkeley.edu>
Date: 1 Aug 88 19:52:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 16


   The only way that I can think of to get the digitized sound
to come out of the tv speaker is to hook a d/a converter up to the
joystick ports (set up the pia for output) and hook the output of the
d/a converter to the audio input on the serial cable (pin 11, I think).
   Alternatly, you could try to use the data to drive the amplitude of
one of the sound chanels, if you know the aproximate frequency of the
sound you are tring to digitize.  This would only work if the frequency
of the sound does not change much..
   I had tried to digitize sound through the pot inputs once before, but
it never worked quite right.  Where did you see the article that said
how to do it??  I would be interested in reading it..

                         Ray Courtois

  Bitnet:   PHR140@URIMVS