Path: utzoo!attcan!uunet!stc-auts!kak
From: kak@stc-auts.UUCP (Kris Kugel)
Newsgroups: comp.sys.att
Subject: Re: AT&T 7300/3B1 High Capacity Disk Upgrade
Summary: use IDT enhancements or Convergent?
Keywords: Put a 190 MB under the hood!
Message-ID: <275@stc-auts.UUCP>
Date: 19 Jul 88 17:46:23 GMT
References: <619@eplrx7.UUCP>
Organization: Storage Technology Corp.  Louisville, CO
Lines: 24

In article <619@eplrx7.UUCP>, lad@eplrx7.UUCP (lad) writes:

> I'm running a 3B1 with a 190MB Maxtor XT2190 in my otherwise stock AT&T
> 3B1.  How I was able to do this was thru a friend or two and a Newark, DE
> firm called IDT.  

	[explanation of 3B1's problem with large disk deleted] 

> IDT makes a kit called the '3B1 HCD Kit'.  For $300. you get:
> 	
> 				*	a WD2010 Controller 
> 				*	a preprogrammed PLA (mine was a P16R4)
> 				*	enough 30AWG wire to complete the mods
> 				*	a diag disk to format/init the drive
> 				*	Full instructions with diagrams
> 				*	Phone support
. . . 
>         Lawrence A. Deleski         uunet!eplrx7!lad

Is this different from the convergent mod available from various people
on the net?  (besides having the parts supplied)
	Kris A. Kugel
	Storage Tek: { uunet!nbires ncar decvax }!stcvax!stc-auts!kak
			maybe: uunet!stc-auts!kak