Path: utzoo!attcan!uunet!husc6!mit-eddie!mit-amt!phil
From: phil@mit-amt.MEDIA.MIT.EDU (Phil Sohn)
Newsgroups: comp.sys.mac
Subject: Re: Is there a good Circuit design program out there???
Message-ID: <2812@mit-amt.MEDIA.MIT.EDU>
Date: 23 Jul 88 19:07:00 GMT
References: <36662@linus.UUCP> <16317@cci632.UUCP>
Reply-To: phil@media-lab.media.mit.edu.MEDIA.MIT.EDU (Phil Sohn)
Distribution: na
Organization: MIT Media Lab, Cambridge MA
Lines: 23

>In article <36662@linus.UUCP>, mdh@linus.UUCP (Mike Houle) writes:
>The July 1988 Issue of MacUser has pages and pages of information on CAD
>applications for the Mac.  It lists two in the ECAD field.
>
>Douglas Electronics
>718 Marina Blvd.
>San Leandro, CA 94577
>(415) 483-8770
> ....
>Pete

	We are using the Douglas Electronics package for updating a MAC II
card we already have running.  Unfortanutely, the schematic package seems
to have several bugs in it.  We have had the package for about five weeks
and have already received two updates, and we are expecting another one.
	On the up side, they seem very supportive and the routing package
seems to work ok.
	Note that the Mac programs are not really made by Douglas, but by
a firm in Canada whose name escapes me at the momment.  Douglas markets
the software and will make boards for you.


						phil