Path: utzoo!utgpu!attcan!uunet!iconsys!caeco!jose!pedro!benjamin_kuo
From: benjamin_kuo@pedro.UUCP (Benjamin Kuo)
Newsgroups: comp.sys.mac.hypercard
Subject: Re: "Too Much Recursion"?
Keywords: Recursion, Go To Card
Message-ID: <545@pedro.UUCP>
Date: 22 Jul 88 00:36:19 GMT
References: <3064@sdsu.UUCP> <452@pedro.UUCP> <3071@sdsu.UUCP>
Organization: Bitsko's Bar & Grill, Public Access, Salt Lake City
Lines: 14



Aha!  Are you using ON OPENCARD?  That's probably your big problem-  When you 
open up the stack, EVERY SINGLE TIME, it will repeat that operation. 
Diagram of your problem: 
  
      Card 1 (go to card 2) ------------> Card 2 (go to card 1) 
                          <-------------- 
  
It will continue to go on and on and on... 
  
It's just an infinite back and forth run, and after 2 or 3 of those HC goes 
wacko.  _Don't_ put go to card xx commands in an opencard, you can get pretty 
confused.