Path: utzoo!attcan!uunet!husc6!mailrus!b-tech!zeeff
From: zeeff@b-tech.UUCP (Jon Zeeff)
Newsgroups: comp.unix.questions
Subject: Re: UUCP over a serial line through a Bridge CS/200 server
Keywords: UUCP, Bridge Communications
Message-ID: <4645@b-tech.UUCP>
Date: 25 Jul 88 21:08:06 GMT
References: <1387@valhalla.ee.rochester.edu>
Reply-To: zeeff@b-tech.UUCP (Jon Zeeff)
Organization: Branch Technology Ann Arbor, MI
Lines: 22

In article <1387@valhalla.ee.rochester.edu> badri@valhalla.ee.rochester.edu (Badri Lokanathan) writes:
>We are running Rick Adam's modified BSD4.3 UUCP on a VAX 11-750 under
>BSD 4.3 Mt. Xinu.
>Recently our department acquired a CS/200 communications server
>manufactured by Bridge Communications, Inc. We would like to have our
>UUCP neighbours dial up a particular machine on the network through
>this server. The connection seems to open up correctly, but there is a
>failure in the g protocol, as indicated by the transcript of the audit

Try using the 'f' protocol.  I wish that terminal servers offered some
kind of uucp 'g' spoofing mode or a 8 bit transparent path.








-- 
Jon Zeeff           		Branch Technology,
uunet!umix!b-tech!zeeff  	zeeff%b-tech.uucp@umix.cc.umich.edu