Path: utzoo!attcan!uunet!husc6!mailrus!purdue!umd5!umbc3!alex
From: alex@umbc3.UMD.EDU (Alex S. Crain)
Newsgroups: comp.windows.x
Subject: X11R2 B/W on a MVAX2000
Message-ID: <1108@umbc3.UMD.EDU>
Date: 25 Jul 88 02:53:23 GMT
Reply-To: alex@umbc3.UMD.EDU (Alex S. Crain)
Organization: University of Maryland, Baltimore County
Lines: 21


	I'm trying to build X11R2 on a MVAX2000 (Qvss display). It builds
ok, and will run happily from xinit, But I can't get it to boot from init.
I set up /dev/[tp]tyv0, and edited the ttys file as per instructions. 
init kicks off X and xterm, and the screen tiles OK, but thats as far as
it ever goes. xterm is running, but theres no window.

	A friend of mine has a simular settup (I think, I've never seen it)
and He says he has an xcons program, but I can find no menchion of such an
animal in the distribution. (I have a /dev/xcons, for what its worth).

	I've tried every possible setup that I can think of, to no avail.
Anybody done this recently???



-- 
					:alex.
					Systems Programmer
nerwin!alex@umbc3.umd.edu		UMBC
alex@umbc3.umd.edu