Xref: utzoo comp.graphics:2856 rec.video:3843 sci.electronics:3434
Path: utzoo!attcan!uunet!husc6!uwvax!astroatc!nicmad!brown
From: brown@nicmad.UUCP (Mr. Video)
Newsgroups: comp.graphics,rec.video,sci.electronics
Subject: Re: converting PAL to NTSC and back
Message-ID: <2922@nicmad.UUCP>
Date: 25 Jul 88 15:46:48 GMT
References: <10034@e.ms.uky.edu>
Reply-To: brown@nicmad.UUCP (Mr. Video)
Organization: Mr. Video's Hangout
Lines: 14

In article <10034@e.ms.uky.edu> simon@ms.uky.edu (Simon Gales) writes:
<What I want is a NTSC to PAL converter to be able to input NTSC into my
<european frame grabber.   I would also like to go the other way (PAL to
<NTSC) in order to record the output on an american (NTSC) vcr.

The average cost for a good digital standards converter is $20,000.  I under-
stand that cheaper models are now becomming available.  But I don't know what
those are like (for quality).

In other words, welcome to the world of non-standard video and big bucks!
-- 
	       harvard-\	att!terminus--\
Mr. Video         ucbvax!uwvax.................!nicmad!brown
	       rutgers-/        att-/ decvax--/