Xref: utzoo comp.periphs:1103 comp.unix.questions:8564 comp.dcom.lans:1666 comp.unix.wizards:10217
Path: utzoo!utgpu!attcan!uunet!husc6!mailrus!uwmcsd1!mrsvr!ssa
From: ssa@mrsvr.UUCP (xxxx)
Newsgroups: comp.periphs,comp.unix.questions,comp.dcom.lans,comp.unix.wizards
Subject: !!! HELP !!! Problem with UNIX tip (cu) and modem
Message-ID: <296@mrsvr.UUCP>
Date: 3 Aug 88 16:04:22 GMT
Organization: GE Medical, MR Center, Milwaukee
Lines: 17


	I have a MultiTech 224E modem connected to a Sun 3/50 ttya port.
	I have it set up so it will answer on the third ring, and
	saved this configuration in the non-volitile ram.  The problem
	is every time I dial a number using tip (or cu) the modem 
	resets it self to factory configuration, unless I turn it off
	and on (giving it the ATZ command also works). This is a pain in the 
	neck because I am using my office phone, and if I forget to reset 
	the modem it picks up the phone immidiately, therefore greeting the 
	caller with a high pitch tone! 

	My question is:	is there a way to tell the modem to reset itself
	(ie: give it the ATZ command) after the dialing, and also:
	what makes the modem go back to factory configuration?


	Thanks,   ssa