Xref: utzoo comp.periphs:1110 comp.sys.apple:6974
Path: utzoo!attcan!uunet!yale!bunker!stpstn!aad
From: aad@stpstn.UUCP (Anthony A. Datri)
Newsgroups: comp.periphs,comp.sys.apple
Subject: imagewriter I on a unix machine
Message-ID: <1954@stpstn.UUCP>
Date: 3 Aug 88 20:32:42 GMT
Reply-To: aad@stpstn.UUCP (Anthony A. Datri)
Organization: The Stepstone Corporation, Sandy Hook, CT
Lines: 15


I've got 3 or so unused imagewriters around, and have been
hanging them off of suns.  As it stands, at anything above 300 baud
they just stop printing after a couple pages.  I have to believe it's
a flow control issue, but unfortunately I don't have an imagewriter
manual.  If someone can enlighten me as to the characteristics of
the serial port, especially any hardware/software flow control
that can be used, I'd be extremely grateful.  I'd also like
to know what the switches other than the baud rate ones do.

-- 
@disclaimer(Any concepts or opinions above are entirely mine, not those of my
	    employer, my GIGI, or my 11/34)
beak is								  beak is not
Anthony A. Datri,SysAdmin,StepstoneCorporation,stpstn!aad