Path: utzoo!attcan!uunet!husc6!uwvax!rutgers!ucsd!ucbvax!hplabs!hp-sdd!ncr-sd!crash!billd From: billd@crash.cts.com (Bill D'Camp) Newsgroups: comp.sys.amiga Subject: Re: A500 expansion connector Message-ID: <3283@crash.cts.com> Date: 8 Aug 88 05:27:11 GMT References: <8808062311.AA08345@MATH.Tau.Ac.IL> Reply-To: billd@crash.CTS.COM (Bill D'Camp) Organization: Bill's Boards, San Diego, CA Lines: 35 In article <8808062311.AA08345@MATH.Tau.Ac.IL> writes: >Hello everyone, > >I can get a C Ltd. 2M memory expansion for the A1000 at a really tempting >price. The only problem is that I own an A500, and not an A1000. >Are there any problems in hooking the memory expansion unit, besides the >simple mechanical problems? I know that I would have to stick it upside >down, but I can get it at such a low price, that I'm willing to buy it, >even if I'll have those mechanical problems. > >Shortly, is the A500 expansion connector different from the A1000 expansion >connector, BESIDES the fact that it's upside-down, and on the opposite ^^^^^^^^^^^ NO!!!!!! I hope you haven't already smoked this board your talking about connecting to your A500. The expansion connector on the A500 is rotated 180 degrees from the orientation of the A1000, the connector is NOT UPSIDE-DOWN. If you attempt to plug anything into the A500 upside-down you will definitely smoke (as in burnup) whatever you're trying to connect. >Udi Finkelstein | Bitnet: finkel@taurus.bitnet or finkel@math.tau.ac.il >Tel Aviv University | Internet: finkel%taurus.bitnet@cunyvm.cuny.edu >Israel | UUCP: ...!psuvax1!taurus.bitnet!finkel -- _ /| Fundamentally Oral Bill \`o_O' UUCP: {akqua,hplabs!hp-sdd,sdcsvax,nosc}crash!billd ( ) Aachk! Phft! ARPA: crash!billd@nosc.mil U INET: billd@crash.CTS.COM Bill's Boards --- peripherals for the Amiga