Xref: utzoo comp.sys.amiga:21495 comp.sys.amiga.tech:1407
Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!dsacg1!dsacg2!nor1675
From: nor1675@dsacg2.UUCP (Michael Figg)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: FF - fonts on TxEd Plus
Keywords: Siesta,Fonts,FF,TxEd Plus,ARP
Message-ID: <221@dsacg2.UUCP>
Date: 4 Aug 88 10:07:03 GMT
Organization: Defense Logistics Agency Systems Automation Center, Columbus, OH
Lines: 23

I have just purchased the TxEd Plus package and although it looks good, I
have had problems getting FF to work on other disks, including the systems
disk I am putting together for TxEd. FF seems to work fine on the orginal
(backup) disk but would not work as a command (after booting) on the systems
disk, but would work fine if put in the startup-sequence. I also tried to put
this in my Lattice 4.0 boot disk (I can't wait for a hard drive to get away
from so many enviroments) and it would not work anywhere. What I get from
FF is "can't find font" twice, which I assume is for replacements for both
the topaz 8 and topaz 9 fonts. I am executing "FF Siesta.font" and have
copied the Siesta directory and Siesta.font to Lattice 4.0.1:fonts. Also
out of curiosity, the Lattice fonts directory is empty, doesn't even have
the default topaz fonts in it, although I have no problem getting them. Both
TxEd Plus and my system disk are ARP'd and I think I have done the same to
my Lattice boot but I don't remember. I wouldn't think it would make a 
difference.

					  Thanks for any help!

-- 
"Better graphics with crayons"                 Michael Figg
					       DLA Systems Automation Center
					       Columbus, Oh.
					       (614)-238-9036