Path: utzoo!utgpu!attcan!uunet!husc6!bloom-beacon!tut.cis.ohio-state.edu!cs.utexas.edu!milano!bigtex!jclyde!john
From: john@jclyde.UUCP (John B. Meaders Jr.)
Newsgroups: comp.sys.ibm.pc
Subject: Re: RLL on non RLL drives
Keywords: RLL Seagate
Message-ID: <795@jclyde.UUCP>
Date: 4 Aug 88 00:52:43 GMT
References: <4650@b-tech.UUCP> <790@jclyde.UUCP> <4654@b-tech.UUCP> <11708@steinmetz.ge.com>
Reply-To: john@jclyde.UUCP (John B. Meaders Jr.)
Organization: Capitalist Warmongers, Inc., Austin, TX
Lines: 15

In article <11708@steinmetz.ge.com> davidsen@crdos1.UUCP (bill davidsen) writes:
>
>  That's not a big enough sample! I have two which work on 2372. Of
>course that's not a big enough sample, either. Adaptec says that the
>4096 should work, and I would expect them to unless you have one which
>is at the outer edge of the acceptable timing spec.

You can add my two ST-251s working with a WD1003-RA2 (under Xenix).
I've been up 6 days now with no problems.  I'll report after about
30 days.

-- 
John B. Meaders, Jr.  1114 Camino La Costa #3083, Austin, TX  78752
ATT:  Voice:  +1 (512) 451-5038  Data:  +1 (512) 371-0550
UUCP:   ...!uunet!utastro!bigtex!jclyde!john  or  john@jclyde.UUCP