Path: utzoo!utgpu!attcan!uunet!yale!bunker!stpstn!aad
From: aad@stpstn.UUCP (Anthony A. Datri)
Newsgroups: comp.terminals
Subject: Re: DEC WT/78 (and now rx02-pa)
Keywords: Digital WT/78 Help rx02-pa
Message-ID: <1950@stpstn.UUCP>
Date: 2 Aug 88 23:14:18 GMT
References: <3092@c3pe.UUCP>
Reply-To: aad@stpstn.UUCP (Anthony A. Datri)
Organization: The Stepstone Corporation, Sandy Hook, CT
Lines: 14


The VT78 is, as far as I can tell, a PDP-8 cpu of some sort (the cmos chip?)
stuck into a vt52 with a floppy controller.

What I'd like to know is why my rx02-pa came with a db25 cable plugged into
the interface board.  It would up under the top of the box and into a db25
on the back.  The rx02-pa should just be a normal rx02 in a vertical box that
looks like a decmate I.  The interface board seems to be the same, so I
just unplugged the berg<->db25 cable and stuck a berg<->berg cable in.
When my rx211 arrives I'll know..-- 
@disclaimer(Any concepts or opinions above are entirely mine, not those of my
	    employer, my GIGI, or my 11/34)
beak is								  beak is not
Anthony A. Datri,SysAdmin,StepstoneCorporation,stpstn!aad