Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!bu-cs!purdue!decwrl!sun!pitstop!sundc!seismo!uunet!mcvax!hp4nl!philapd!ssp15!jos
From: jos@idca.tds.PHILIPS.nl (Jos Vos)
Newsgroups: comp.dcom.modems
Subject: Trailblazer in fixed transmission mode
Keywords: Trailblazer Plus 3.01, S50
Message-ID: <531@ssp15.idca.tds.philips.nl>
Date: 1 Sep 88 15:11:41 GMT
Organization: Philips TDS, P.O. Box 245, 7300 AE Apeldoorn, The Netherlands
Lines: 16

After working some time with the Trailblazer Plus (3.01) with S50=0
(automatic speed determination in the modem-modem connection), I discovered
that S50=2 or 3 (I didn't try the others) didn't succeed as originator
when the answering modem doesn't immediately answer the phone.
On the first ring the originating Tb says: NO CARRIER.

I tried it with another Trailblazer: when setting the answering Tb S0=4,
I couldn't reach him anymore with my Tb with S50=3.
When setting S0=1 on the answering one, I could reach it with S50=3 at
the calling site.

Any suggestions?

-- 
-- ######   Jos Vos   ######   Internet   jos@idca.tds.philips.nl   ######
-- ######             ######   UUCP         ...!mcvax!philapd!jos   ######