Xref: utzoo comp.sys.m68k:982 comp.misc:3285
Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!mit-eddie!andante!jac
From: jac@andante.UUCP (Jonathan Chandross)
Newsgroups: comp.sys.m68k,comp.misc
Subject: 68030 Multibus I upgrade available
Message-ID: <11960@andante.UUCP>
Date: 3 Sep 88 21:23:43 GMT
Organization: AT&T Bell Laboratories, Murray Hill
Lines: 37


Someone asked about upgrades for Multibus I systems.  In the September 1 issue
of EDN, on page 113, there is a product announcement for a 68030 Multibus I
board.

The board features
	-- 20 or 33 MHZ 68030 
	-- 68882
	-- SCSI port running synchronously up to 4 Mbytes/sec
	-- 4 Meg RAM on board, expandable to 40 Meg via a local bus implemented
	   on the P2 connector.
	-- 2 M EPROM
	-- (5) 16 bit timers
	-- Custom MMU compatable with the SUN MMU.  The SUN MMU features a
	   256 Mbyte address range and 64,000 descriptors.
	-- Daughter boards can add:
		-- 20 MFlop Math processor
		-- 1660x1280 Pixel Video Controller
	-- Forth Interpreter in ROM
	-- Monitor in ROM

Configured with a 20 MHz processor and 4 Mbytes of RAM is: $4575, quantity 100.

Contact:
	Synergy Microsystems
	179 Calle-Magdalena
	Encinitas, CA 92024
	619-753-2191

I have no connection with Synergy, nor have I even so much as *seen* one of 
these beasties.  All I know about this product is what I saw in the EDN 
article.  Caveat emptor.


Jonathan A. Chandross
allegra!jac
jac@allegra.att.com