Path: utzoo!utgpu!attcan!uunet!mcvax!hp4nl!dutrun!rcdswal
From: rcdswal@dutrun.UUCP (Guus van der Wal)
Newsgroups: comp.protocols.tcp-ip
Subject: KA9Q with MOCOM NI5010
Message-ID: <362@dutrun.UUCP>
Date: 25 Aug 88 10:22:44 GMT
Reply-To: rcdswal@dutrun.UUCP (G.v.d.Wal.)
Organization: Delft University of Technology, The Netherlands
Lines: 14

This must have been asked many times before, but I began to
use Ethernet only recently.
I have a MICOM interlan NI5010 ethernet adapter in my IBM pc/at.
I also have Phil Karn's KA9Q TCP-IP software. The KA9Q docs
only talk about the 3COM 3C500 ethernet card.
 
Is there anybody out ther who has (made) KA9Q working with MICOM ??
Thanks in advance
                          Guus
-- 
Guus van der Wal
Computing Centre Technical University Delft
USEnet: rcdswal@dutrun
BITnet: rcdswal@hdetud1