Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!mailrus!cornell!batcomputer!sun.soe!sun.soe.clarkson.edu!nelson From: nelson@sun.soe.clarkson.edu (Russ Nelson) Newsgroups: comp.protocols.tcp-ip Subject: Re: KA9Q with MOCOM NI5010 Message-ID: Date: 30 Aug 88 14:27:03 GMT References: <362@dutrun.UUCP> Sender: root@sun.soe Reply-To: nelson@clutx.clarkson.edu Distribution: na Organization: Clarkson University Lines: 18 In-reply-to: rcdswal@dutrun.UUCP's message of 25 Aug 88 10:22:44 GMT In article <362@dutrun.UUCP> rcdswal@dutrun.UUCP (Guus van der Wal) writes: I have a MICOM interlan NI5010 ethernet adapter in my IBM pc/at. I also have Phil Karn's KA9Q TCP-IP software. The KA9Q docs only talk about the 3COM 3C500 ethernet card. Is there anybody out ther who has (made) KA9Q working with MICOM ?? Ha! Interesting that you should ask that question, since I have recently ported Bill Doster's NI5010 driver from C (to be compiled in) to a packet driver. This is not tested, however. You (and in fact, anyone who is interested) can either debug it yourself or wait until I get a NI5010 loaned to me from another department, which may take as long as two weeks. I'll mail a copy to anyone who's really hot to get a copy... -- --russ (nelson@clutx [.bitnet | .clarkson.edu]) Shuzan held out his short staff and said, "If you call this a short staff, you oppose its reality. If you do not call it a short staff, you ignore the facts. Now, what do you wish to call it?"