Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!amdcad!sun!pitstop!sundc!seismo!uunet!mcvax!ukc!stl!stc!idec!prlhp1!ockenden
From: ockenden@prlhp1.prl.philips.co.uk (Paul T Ockenden)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Writting SCSI commands to the C.Ltd controller
Keywords: C.Ltd SCSI C
Message-ID: <620@prlhp1.prl.philips.co.uk>
Date: 28 Aug 88 11:03:18 GMT
References: <1408@ektools.UUCP>
Reply-To: ockenden@prlhp1.UUCP (Paul T Ockenden)
Organization: Philips Radiotherapy Systems, Crawley, U.K.
Lines: 22

In article <1408@ektools.UUCP> barrett@ektools.UUCP (Chris Barrett) writes:
>HELP!  Anyone know how to write SCSI commands to devices that are connected
>to the C.Ltd SCSI interface?  I'm still trying to connect a streaming tape
>drive to my Amiga.  Any help would sure be appreciated.  Thanks in advanced.

Me too!!! - The C-Ltd documentation mentions that you can connect tape
drives to their I/F, but they give no instructions at all, and I've found
their telephone support to be *lousy*, which is a pig when I have to
phone from England !!!

The documentation says that there are SCSI Read and Write programs on the
disk, but *I* didn't get any......

Oh, and does anyone know what the latest release of the C-Ltd software for
the controller is ???


-- 
Paul Ockenden  Philips Radiotheapy Systems, Crawley, UK  +44 293 28787 x 4349
 ...!mcvax!ukc!prlhp1!ockenden  OR ...!mcvax!prlb2!prlb!paul-melm03-decnet
       Any opinions expressed are not necessarily those of Philips.