Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ucbvax!UNTVAX.BITNET!mark
From: mark@UNTVAX.BITNET
Newsgroups: comp.sys.apple
Subject: 6502 & 65C02 assembly
Message-ID: <8808221225.aa23819@SMOKE.BRL.MIL>
Date: 22 Aug 88 17:33:45 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 19
X-Unparsable-Date: Sat, 20-AUG-1988 19:20:48.42 CST

Well, nothing like starting on something really late, so here is my questions:
what is  a good book, or book/disk combo for learning 6502 assembly?  Recently,
I put a 65C02 in my unenhanced IIe and have been running just fine with
it, but I would think that there would be some differences in the assembly
code of each, is this the case?
        Also, in case it helps, I am not unfamiliar with assembly in general
(I took an IBM 370 assembly class last Spring and thought that it was rather
interesting), but I do not know the Mini-assembler built into the II, so
I would like to have some specific Apple IIe guide.

        Thanks in advance for the help.

---Mark Thacker

================================================================================
Mark Thacker                  Bitnet : MARK@UNTVAX or AC48@UNTVAX
Graphics Lab Consultant       THENET : NTVAXB::MARK  or NTVAXB::AC48
(and student of CSCI at)    Internet : MARK%ntvaxb.decnet@utadnx.cc.utexas.edu
The University of North Texas   SPAN : UTSPAN::UTADNX::NTVAXB::MARK
================================================================================