Path: utzoo!utgpu!water!watmath!clyde!bellcore!rutgers!gatech!ncar!mailrus!iuvax!bose
From: bose@iuvax.cs.indiana.edu
Newsgroups: comp.sys.ibm.pc
Subject: Re: EGA -> VGA on Multiscan
Message-ID: <36300025@iuvax>
Date: 24 Aug 88 15:14:00 GMT
References: <200008@hpmcaa.HP.COM>
Organization: Indiana University CSCI, Bloomington
Lines: 24
Nf-ID: #R:hpmcaa.HP.COM:-20000800:iuvax:36300025:000:832
Nf-From: iuvax.cs.indiana.edu!bose    Aug 24 10:14:00 1988


I have a Sony running on a IBM model 80.  All you have to do is
remap the pinouts to match that of the Sony.
VGA                     Sony
1  red                  ground
2  green                ground
3  blue                 red
4  not used             green
5  ground               blue
6  ground               ground
7  ground               not used
8  ground               horizontal sync
9  no pin               vertical sync
10 ground
11 not used
12 not used
13 horizontal sync
14 vertical sync
15 not used
I made the above remappings based on the sony manual and the vga manual
for a paradise vga plus card.  I made up my own cable that has a 15pin
connector on one end and a 9pin on the other.  Check the pinouts in your
manuals to make sure you make the correct connections.  Sony also
sells a cable for the 15pin connector.