Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!oliveb!pyramid!prls!philabs!ttidca!clark From: clark@ttidca.TTI.COM (Ralph Clark) Newsgroups: comp.os.minix Subject: Minix 1.3b on my NEC V30 system Keywords: NEC V30 tty Message-ID: <3159@ttidca.TTI.COM> Date: 10 Sep 88 04:35:30 GMT Organization: Citicorp/TTI, Santa Monica Lines: 39 In response to the NEC V30 inquiry, mine runs OK. I've got a Victor Champion, 4.77Mh NEC V30 (like an 8086), 16-bit memory, 8-bit bus, Hercules graphics, and ST-238 30-meg disk with WD_27X controller. Please add to the "runs on" list. Here are a few notes about my experience with MINIX 1.3b. I think I'm running most of it as distributed, built up from my original 1.1 Prentice- Hall disks plus 1.2 compiler from UniPress. I've made my posted changes to xt_wini.c. I'm running Charles Hedrick's new tty.c (because I wanted the expanded ANSI control sequences support). I'm running someone else's mount and umount and df posted as 1.2 mods, because I like the df display better, especially the default of all disks if no device is specified. I've been happy with the 1.2 printer.c with my Epson FX-80+ printer, but I haven't run it very hard - mostly docs and manuals. The help program recently posted by someone is really great for MINIX man pages. (I wish I had the original 1.1 set online - I thought I read once that they were in some directory in the distribution, but I never found them in my 640K XT set.) The new tty driver seems to be able to connect well on my system (with a Supra 2400-baud modem running at 1200). I can use term to talk to a VAX (although it's a bit jerky for reading news). The posted Kermit doesn't work as well for a terminal program (ls -l on the vax produces half a screen of file data and half a page of Greek characters!), and I can't seem to get a file transfer dialogue going - the vax acts like it doesn't see the response. Locally, it was somehow less of a thrill than I had expected when I finally got a login: prompt on my PC Jr with Procomm connected via a null modem cable, but it worked just like the console. Note that I said "connect" well. It works once, to the vax or the pcjr, and then tty1 seems to get lost (yes, I do boot with /etc/ttys either 0c1 or 1c1). When I run stty