Xref: utzoo comp.sources.wanted:5028 comp.mail.uucp:1884 comp.sys.ibm.pc:19093
Path: utzoo!attcan!uunet!van-bc!skl
From: skl@van-bc.UUCP (Samuel Lam)
Newsgroups: comp.sources.wanted,comp.mail.uucp,comp.sys.ibm.pc
Subject: Re: UUCP for MS-DOS
Summary: I forgot to say how long the file "interim.arc" is
Keywords: UUPC latest version UUCP Addendum
Message-ID: <1874@van-bc.UUCP>
Date: 13 Sep 88 10:40:50 GMT
References: <6246@batcomputer.tn.cornell.edu> <1873@van-bc.UUCP>
Reply-To: uupc@van-bc.UUCP (UUPC Development Group)
Organization: UUPC Development Group, Vancouver, B.C., Canada
Lines: 21

This is an addendum to what I said in <1873@van-bc.UUCP>.

In that article, I wrote:
>The latest IBM-PC/MS-DOS UUPC is available for download at van-bc.UUCP ...

What I forgot to say was how long the file in question, "interim.arc",
is, so that people can figure out approximately how much phone time the
transfer is going to take before they call.  Here is the information:

The file "interim.arc" is 184,028 bytes long, and should be transfered
in "binary" mode if you are using [XYZ]MODEM.  It will take around 30
minutes at 1200 baud, about 15 mintues at 2400 baud, and around four (4)
minutes if you call in with Telebit Trailblazer Plus' PEP mode at 9600
baud or higher.

Also a reminder to the direct UUCP callers that the directory the
"interim.arc" file is in is "~/uupc", not "~/uucp" .
				 ^^            ^^
...Sam (UUPC release 2.0 co-ordinator)
-- 
Samuel Lam     {alberta,watmath,uw-beaver,ubc-vision}!ubc-cs!van-bc!skl