Path: utzoo!attcan!uunet!mcvax!cernvax!zofka
From: zofka@cernvax.UUCP (zofka)
Newsgroups: comp.sys.amiga
Subject: Re: EPROM programmer
Message-ID: <824@cernvax.UUCP>
Date: 15 Sep 88 14:23:27 GMT
References: <13240002@hprmokg.rnd.hp>
Reply-To: zofka@cernvax.UUCP ()
Organization: CERN European Laboratory for Particle Physics, CH-1211 Geneva, Switzerland
Lines: 21

In article <13240002@hprmokg.rnd.hp> alh@hprmokg.rnd.hp (Al Harrington) writes:
>Does anyone know if there is an EPROM programmer for the Amiga?

Curently there is nothing but In the near future, there will be
a Multi-Purpose programmer... Not a IBM low capability style programmer
but a general purpose programmer...

Planned in our development: Eproms from 16k to 8meg (for future compa-
tibility, data sheets exists but no chips!) Pals and Mega pals, One
chip Micro-processos, Proms EEproms EPALS and so on. A complete
library to program the board for any chip and the capability of
generating or read any signal from 1 to 35 volts from any 64 pins
socket (from 1 pin to 64 )

Does anything of a so complete board exists on any popular system today?

It will no be cheap (1200$) but complete with one year upgrades and
waranty... Delivery date: Unknow (maybe 1st quarter 89)
Replys to me (zofka@cernvax.UUCP)

Milan