Xref: utzoo comp.sys.amiga:22861 comp.sys.amiga.tech:1845
Path: utzoo!attcan!uunet!cbmvax!joe
From: joe@cbmvax.UUCP (Joe O'Hara)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: A2090 Question
Message-ID: <4740@cbmvax.UUCP>
Date: 15 Sep 88 13:08:51 GMT
References: <925@jimi.cs.unlv.edu>
Reply-To: joe@cbmvax.UUCP (Joe O'Hara)
Organization: Commodore Technology, West Chester, PA
Lines: 19

In article <925@jimi.cs.unlv.edu> ray@jimi.cs.unlv.edu (Ray Tripamer) writes:
>
>I have an A2090 (I am waiting for my ST-251N to arrive!!).  I have noticed
>something about the 50-Pin SCSI connecter on the card - that there are
>really only 48 pins!  That is because the 2 pins on about row 7 (counting from
>the bottom) are sheared off at the base of the connector.  Do I have a
>defective card, or is this the way the card comes?
>
>Thanks.

The empty row should be in the center (i.e., row 13).

-- 
========================================================================
  Joe O'Hara                ||  Comments represent my own opinions,
  Commodore Electronics Ltd ||  not my employers. Any similarity to
  Software QA               ||  to any other opinions, living or dead,
                            ||  is purely coincidental.
========================================================================