Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!tektronix!tekig5!tekig4!deang
From: deang@tekig4.TEK.COM (Dean Gehnert)
Newsgroups: comp.sys.apple
Subject: SCSI HD (was: D-I-Y SCSI for Apple ][)
Message-ID: <3211@tekig4.TEK.COM>
Date: 13 Sep 88 16:23:10 GMT
References: <7841@mtune.ATT.COM> <3606@dad.UUCP>
Reply-To: deang@tekig4.TEK.COM (Dean Gehnert)
Distribution: na
Organization: Tektronix, Inc., Beaverton,  OR.
Lines: 25

In article <3606@dad.UUCP> nelson@dad.UUCP (Paul Nelson) writes:
>in article <7841@mtune.ATT.COM>, rkh@mtune.ATT.COM (Robert Halloran) says:
>> 
>> Has anyone tried 'rolling their own' SCSI hard disks for an Apple ][?
>I own a CMS 60M hard drive with a CMS scsi interface.  After reading
>alot about building your own scsi hard drive,
....
>					Paul Nelson
>					...tikal!dad!nelson

I have personally tried the 'roll yer own' SCSI hard drive system. And it
works VERY well. I have the pinouts for putting it together, and are 
available to anyone that is willing to do some soldering and save about
$200 under the price of a CMS 60meg!! I now have a SCSI system with a ST277N
in an external case (with room for one more after 32meg prodos volume limit
is changed) and a CMS SCSI card. If I get enough response, I will post for
all to see and SAVE!!

Dean W. Gehnert   ...tektronix!tekig4!deang

-- 
----------------------------------------------------------------------------
          Dean Gehnert, Tektronix Inc.  phone:(503) 627-4428
   tektronix!tekig4!deang | deang@tekig4.UUCP | deang@tekig4.LEN.TEK.COM
----------------------------------------------------------------------------