Path: utzoo!attcan!uunet!peregrine!elroy!ames!husc6!cmcl2!phri!marob!samperi
From: samperi@marob.MASA.COM (Dominick Samperi)
Newsgroups: comp.unix.microport
Subject: Re: using an above board's serial port
Keywords: above board 286/ps
Message-ID: <402@marob.MASA.COM>
Date: 6 Sep 88 11:39:22 GMT
References: <297@hawkmoon.MN.ORG> <451@uport.UUCP> <196@dcs.UUCP> <456@uport.UUCP>
Reply-To: samperi@marob.masa.com (Dominick Samperi)
Organization: ESCC  New York City
Lines: 11

In article <456@uport.UUCP> plocher@uport.UUCP (John Plocher) writes:
|>The problem with "sharing" IRQ lines across boards is the fact that
|>the hardware which drives the IRQ lines is not open collector logic,
|>but uses pull up resistors and normal line drivers.  This means that 

Impressive, now about that C compiler bug... :-)
-- 
Dominick Samperi, NYC
    samperi@acf8.NYU.EDU	samperi@marob.MASA.COM
    cmcl2!phri!marob        	uunet!hombre!samperi
      (^ ell)