Path: utzoo!attcan!uunet!convex!killer!ames!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!sm.unisys.com!CAM.UNISYS.COM!jonab
From: jonab@CAM.UNISYS.COM (Jonathan P. Biggar)
Newsgroups: comp.protocols.appletalk
Subject: Problems with cap5.0 lwsrv
Message-ID: <437@sdcjove.CAM.UNISYS.COM>
Date: 30 Sep 88 23:50:43 GMT
Reply-To: jonab@cam.unisys.com (Jonathan P. Biggar)
Organization: UNiSYS R+D Distributed Architectures, Camarillo, CA
Lines: 71


I have cap 5.0 up and running fine, except I can't get lwsrv to run.
I am running kip 9/87.

I can spool from my SunOS 3.5 machines using papif to a appletalk
laserwriter ok, but when I attempt to start lwsrv on my sun, it
fails.  Here is a debug trace from lwsrv

sdckronos# /usr/local/cap/lwsrv -n 'Cam LW+:LaserWriter@*' \
-p clw -a /usr/local/cap/dicts \
-f /usr/local/lib/LWPlusFonts -dldanpisk
debugging LAP
debugging DDP
debugging ATP
debugging NBP
debugging PAP
debugging INI
debugging ASP
debugging SKD
ddp: open socket: opened socket 129
lwsrv: Spooler starting for Cam LW+:LaserWriter@*.LaserWriter.*
lwsrv: simple: Font list from file /usr/local/lib/LWPlusFonts
lwsrv: (re)Scanning for Procsets
ddp: open socket: opened socket 130
NBP SndNBP: sending
port for at-nbp is 770
abSelect enter... 0 doTimeout...exit to abSleep
NBP nbp_timeout: 4 tick timeout on 251657036, 3 remain
NBP SndNBP: sending
abSelect enter... 0 doTimeout... timeout occurred exit to abSleep
abSelect enter... 0 doTimeout...exit to abSleep
NBP nbp_timeout: 4 tick timeout on 251657036, 2 remain
NBP SndNBP: sending
abSelect enter... 0 doTimeout... timeout occurred exit to abSleep
abSelect enter... 0 doTimeout...exit to abSleep
NBP nbp_timeout: 4 tick timeout on 251657036, 1 remain
NBP SndNBP: sending
abSelect enter... 0 doTimeout... timeout occurred exit to abSleep
abSelect enter... 0 doTimeout...exit to abSleep
NBP nbp_timeout: 4 tick timeout on 251657036, 0 remain
abSelect enter... 0 doTimeout... timeout occurred exit to abSleep
NBP SndNBP: sending
abSelect enter... 1 fdlistenread call
NBP status done: found 251657036
exit to abSleep
lwsrv: SLInit failed: -1027
sdckronos#

Here is my /etc/atalkatab file:
#
55.0	H	128.170.0.100	CAMARILLO
56.1	KC	128.170.0.100	CAMARILLO
	I128.170.0.0	I128.170.0.1		#ipbroad ipname
	I128.170.0.8	L0			#ipdebug ipfile
	L0 L0 L0 L0	S0 S0			#ipother unused unused
	LX0		S0	S9		#flags ipstatic ipdynamic
	S56.1	S55.0	"CAMARILLO"		#atneta atnete zonea

And here is my /etc/atalk.local file:
# mynet mynode myzone 
55.0 8 CAMARILLO
# bridgenet bridgenode bridgeIP
55.0 100 128.170.0.100

The IP address of the host I am running on is 128.170.0.8.

Can anyone give me a clue why this doesn't work.  I had it working once,
but lost the configuration files and I don't seem to be able to reconstruct
it correctly.

Jon Biggar
jonab@cam.unisys.com