Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!uflorida!gatech!udel!mmdf From: daveb%cbmvax.uucp@UDEL.EDU Newsgroups: comp.sys.amiga Subject: Re: Colour output technology, was(Re: Structured Graphics Standard) Message-ID: <4384@louie.udel.EDU> Date: 3 Oct 88 21:56:19 GMT Sender: mmdf@udel.EDU Lines: 26 Received: from CUNYVM by CUNYVM.BITNET (Mailer X2.00) with BSMTP id 3189; Fri, 30 Sep 88 17:15:51 EDT Received: from UDEL.EDU by CUNYVM.CUNY.EDU (IBM VM SMTP R1.1) with TCP; Fri, 30 Sep 88 17:15:45 EDT Received: from Louie.UDEL.EDU by Louie.UDEL.EDU id aa12808; 30 Sep 88 15:23 EDT Received: from USENET by Louie.UDEL.EDU id aa12647; 30 Sep 88 15:13 EDT From: Dave Berezowski Subject: Re: Colour output technology, was(Re: Structured Graphics Standard) Keywords: Colro Lasers Tektronix Message-ID: <4900@cbmvax.UUCP> Date: 30 Sep 88 17:42:10 GMT Organization: Commodore Technology, West Chester, PA To: amiga-relay@UDEL.EDU Sender: amiga-relay-request@UDEL.EDU In article <7371@gryphon.CTS.COM> jdm@gryphon.CTS.COM (John Mesiavech) writes: > > For Reference Purposes: > >Tektronix makes a color 300DPI output device, their 4693D IS a 300DPI color >output device. Costs about 12 grand though, and would need the >(ecch) Mac-Too interface to get it to work with the AMiga. > Actually the base unit cost $8000 not $12,000 (we have one here at cbm). As far as a driver goes, there is a V1.3 printer driver which has the odd name of 'Tektronix_4693D' :^)