Xref: utzoo comp.sys.att:4376 comp.sys.ibm.pc:19797
Path: utzoo!attcan!uunet!seismo!sundc!pitstop!sun!decwrl!labrea!rutgers!att!whuts!chl
From: chl@whuts.UUCP (LANG)
Newsgroups: comp.sys.att,comp.sys.ibm.pc
Subject: Re: Bernoulli on AT&T 6300?
Summary: Don't need to use GOSLOW
Message-ID: <4842@whuts.UUCP>
Date: 29 Sep 88 16:04:46 GMT
References: <279@oglvee.UUCP> <55002DMC109@PSUVM>
Organization: AT&T Bell Laboratories
Lines: 13

> Note that the 6312 and 6386 must be run in the 'goslow' mode or you will
> not be able to read the cartridges on a PLUS or 6300.
> 

I use a Bernoulli on my 6386 at work and take home several cartridges
all the time to continue work at home on my 6300.   I have never had
a problem reading data written by the 6386 and I never run it in the
'goslow'.  I don't think it is necessary.  At least not from my
experience.

Charlie Lang
AT&T Bell Labs
whuts!chl