Path: utzoo!attcan!uunet!seismo!sundc!pitstop!sun!amdcad!ames!ll-xn!mit-eddie!husc6!purdue!decwrl!nfinit.dec.com!mike
From: mike@nfinit.dec.com (Mike LaPierre)
Newsgroups: comp.sys.ibm.pc
Subject: Setting AT clock speed within a program
Message-ID: <8809301955.AA21378@decwrl.dec.com>
Date: 30 Sep 88 19:55:32 GMT
Organization: Digital Equipment Corporation
Lines: 9

Can anyone tell me if it is possible to check what speed
the AT is running at (6/8/10/12 Mhz) from within a C program
and set it to the maxium if its not already? I suspect that
it can be set through some interrupt, but wasn't able to
find anything in the recently posted interrupt list.
 
                       Thanks in advance....
 
                         -- Mike LaPierre