Xref: utzoo comp.sys.mac:21078 comp.sys.mac.programmer:2604
Path: utzoo!attcan!uunet!husc6!rutgers!bellcore!faline!thumper!pff
From: pff@thumper.bellcore.com (Peter Ferris)
Newsgroups: comp.sys.mac,comp.sys.mac.programmer
Subject: The Missing LINK of LSC 3.0?!
Keywords: LSC, LINK, FAILURE, FRUSTRATION
Message-ID: <1340@thumper.bellcore.com>
Date: 1 Oct 88 18:54:07 GMT
Organization: Bell Communications Research
Lines: 28

I recently purhcased LSC 3.0.  I've set up my folders as described in the manual
 however I am experiencing a problem:        
Everytime I start / run an application I ALWAYS get a "LINK FAILURE" (or 
"Link Failed" - or whatever the exact verbage is) with the despicable 
housefly!                            
                             
Even apps that ran fine with earlier LSC don't "Link" anymore.  I suspect 
A) Somethings missing / misplaced in one of my folders, or more UNlikely:
B) Something's missing from the LSC 3.0 discettes.         
                                                             
"Bullseye", etc; etc; don't run and neither does anything else.  I figured 
it's probably trivial and not worth the call to Think, it was easier to try
the net first?  Any takers on this prob?  I'd think it refreshingly easy
in comparison to some questions / probs I've seen lately!
              
Again, the over riding problem is the damn "LINK FAILURE".  
                                                  
Your help is greatly appreciated...
                                               
Pete Ferris                              
pff@thumper.bellcore.com

P.S.: BTW: I'm running this on a Mac II w/ 100MB Rodime.  I'm trying to learn
"C" very slowly, but I'm trying a very simple phone dialer.  Any hints / tips  
or kinks about serial operation would be greatly appreciated too - incl. sample
terminal programs - the simpler the better in this case!

P.F.F.