Path: utzoo!attcan!uunet!mcvax!enea!kth!draken!ragge
From: ragge@nada.kth.se (Ragnar Sundblad)
Newsgroups: comp.sys.mac.programmer
Subject: Synchronous serial communication
Message-ID: <590@draken.nada.kth.se>
Date: 5 Oct 88 21:38:13 GMT
Reply-To: ragge@nada.kth.se (Ragnar Sundblad)
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 9

Is it possible to do synchronous communication with the Serial Driver?
I have understood that I can connect a clock to the HSKI-pin, but then?
How do I tell the driver that it should use an external clock?
How do I tell it to be synch.?
How do I set the idle patterns etc?

Any help greatly appreciated!

	/ragge@nada.kth.se