Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!orstcs!statware!scf
From: scf@statware.UUCP (Steve Fullerton)
Newsgroups: comp.unix.xenix
Subject: Re: WD ACB-2372 and Everex 386/20. Was (Adaptec ACB-2372 and Everex 386/20?)
Message-ID: <1060@statware.UUCP>
Date: 1 Oct 88 16:51:29 GMT
References: <3e9fa283.6bad@apollo.COM> <569@vector.UUCP> <1932@turnkey.TCC.COM>
Reply-To: scf%statware.UUCP@cs.orst.edu (Steve Fullerton)
Organization: Statware, Corvallis, Oregon
Lines: 19

In article <1932@turnkey.TCC.COM> larry@turnkey.UUCP writes:
>I was thinking of using the WD1006RAH 1:1 RLL controller (which has
>no floppy support) and a seperate WD1002A FOX F004 floppy controller
>card (which will handel 4 floppy drives) so that I could install a 
>3-1/2" floppy in addition to the 1.2 MB and 360 KB drives.  If anyone
>has done this, I would be interested in knowing what is involved in
>terms of device drivers for the additional floppy drives.
>

Please let me know about this configuration also.  I am also considering
the WD1006 controller with a Seagate ST-4096 drive and I haven't heard back
from SCO whether it is viable, legal, or how to do it.  I would put in any
floppy controller card that would work.

-- 
Steve Fullerton                        Statware, Inc.
scf%statware.uucp@cs.orst.edu          260 SW Madison Ave, Suite 109
orstcs!statware!scf                    Corvallis, OR  97333
                                       503/753-5382