Path: utzoo!attcan!uunet!husc6!cmcl2!rutgers!cbmvax!joe
From: joe@cbmvax.UUCP (Joe O'Hara)
Newsgroups: comp.sys.amiga
Subject: Re: experiences with A2090A
Message-ID: <4997@cbmvax.UUCP>
Date: 15 Oct 88 13:08:13 GMT
References: <4824@louie.udel.EDU> <12350@steinmetz.ge.com>
Reply-To: joe@cbmvax.UUCP (Joe O'Hara)
Organization: Commodore Technology, West Chester, PA
Lines: 14

In article <12350@steinmetz.ge.com> perley@mazda.steinmetz.ge.com (Donald P Perley) writes:
>
>But for a warm boot you could do it off the ram disk, so what good
>does the A2090*A* do?  Or can you power on, let the boot fail, wait for
>the drive to initialize, then reboot?

Yes. The Seagates take approx. 25 seconds to initialize from power-on.
-- 
========================================================================
  Joe O'Hara                ||  Comments represent my own opinions,
  Commodore Electronics Ltd ||  not my employers. Any similarity to
  Software QA               ||  to any other opinions, living or dead,
                            ||  is purely coincidental.
========================================================================