Path: utzoo!attcan!uunet!super!udel!rochester!cornell!mailrus!iuvax!pur-ee!pur-phy!ng From: ng@pur-phy (Nicholas J. Giordano) Newsgroups: comp.sys.amiga Subject: Re: transactor Message-ID: <1587@pur-phy> Date: 17 Oct 88 13:22:06 GMT References: <4802@louie.udel.EDU> <524@amanpt1.zone1.com> Reply-To: ng@newton.physics.purdue.edu.UUCP (Nicholas J. Giordano) Organization: Purdue Univ. Physics Dept., W. Lafayette, IN Lines: 14 In article limonce@pilot.njin.net (Tom Limoncelli) writes: >In article <524@amanpt1.zone1.com> mrr@amanpt1.zone1.com (Mark Rinfret) writes: This is certainly a shame. I seem to recall discussion on the net about an article which was to appear in the next Transactor issue. The article was about a do-it-yourself 68020 board for the A1000 (I think). Presumably the design/bare-board etc. are finished, so my question is this. Does the author plan to release this information or publish his article anyplace else??? I, for one, am very interested. Nick