Path: utzoo!attcan!uunet!super!udel!rochester!kodak!ektools!barrett
From: barrett@ektools.UUCP (Chris Barrett)
Newsgroups: comp.sys.amiga
Subject: Re: Early experience with 2090A controller
Keywords: sure doesn't smell like a rose
Message-ID: <1511@ektools.UUCP>
Date: 14 Oct 88 12:43:20 GMT
References: <c0.6va0CVf1010TxC9.@amdahl.uts.amdahl.com| <12772@oberon.USC.EDU>
Reply-To: barrett@ektools.UUCP (Chris Barrett)
Organization: Eastman Kodak, Dept. 47, Rochester NY
Lines: 8

I don't have a 2090 or 2000, but I found that ALL my initial hard drive 
problems related to not having the hard drive chassis grounded to the 
chassis ground in the hard drive cabinet.  Might want to try this, the st251
has 3 ground screws on the controller board side that you can ground to.

Chris.

rochester!kodak!ektools!barrett