Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!mit-eddie!bbn!rochester!pt.cs.cmu.edu!cadre!pitt!cisunx!ejkst
From: ejkst@cisunx.UUCP (Eric J. Kennedy)
Newsgroups: comp.sys.amiga
Subject: Re: A HD controller review
Message-ID: <13363@cisunx.UUCP>
Date: 26 Oct 88 18:50:25 GMT
References: <8810201315.AA19782@decwrl.dec.com> <42@sns.UUCP>
Reply-To: ejkst@unix.cis.pittsburgh.edu (Eric J. Kennedy)
Organization: Univ. of Pittsburgh, Comp & Info Sys
Lines: 20

In article <42@sns.UUCP> space@sns.UUCP (Lars Soltau) writes:
>
>If you mount a partition, which you have to do if you are using FFS, you can
>include those two lines into your Mountlist:

Okay, I've seen enough people say something of this sort, and the 1.3
Enhancer manual says something like this too, that the first partition
on the drive must be the old filesystem.  Now, is this really true for
all cases or is it only true for the A2090?  I have a C.LTD SCSI
controller and hard disk on my A1000, and the FFS appears to work OK,
even though I have only 1 partition, covering the entire disk.  Anyone
know for sure?

Thanks,

-- 
                               +-=-=-=-=-=-=-=-=-+
Eric Kennedy                   | Bush   &        |
ejkst@cisunx.UUCP              | Bentsen  '88 !! | 
                               +-=-=-=-=-=-=-=-=-+