Path: utzoo!attcan!uunet!super!udel!princeton!njin!rutgers!tut.cis.ohio-state.edu!bloom-beacon!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Request for interactive serial port-driver.
Message-ID: <12816@oberon.USC.EDU>
Date: 15 Oct 88 05:02:22 GMT
References: <585@ssp15.idca.tds.philips.nl>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 15

In article <585@ssp15.idca.tds.philips.nl> fwvo@idca.tds.PHILIPS.nl (Ferdinand van Ommen) writes:
|When attaching a dumb vt100-terminal to the Amiga-500's serial port I
|succeeded in starting up the communication.(I started newcli ser:).
|However, the following problem arose:
|If you want a command to be executed it seems to be necessary to fill 
|the serial port's buffer (which has a minimum of 1/2kilobytes according to
|'preferences') with newlines.

Get 1.3. It contains the AUX: device that will do the job you need.

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=