Xref: utzoo comp.sys.amiga:24065 comp.sys.amiga.tech:2141
Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: harddisk on bridgecard slowness woes
Message-ID: <12859@oberon.USC.EDU>
Date: 17 Oct 88 07:54:54 GMT
References: <6196@watcgl.waterloo.edu> <10066@cup.portal.com>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 19

In article <10066@cup.portal.com> Sere@cup.portal.com (Serenella z Ciongoli) writes:
|I also am interested in using the FFS with my Hard Disk (an SCSI Seagate ST299N
|connected to the Bridgeboard). I have not been able to create a working
|mountlist from the hints that Andy Finkel gave in his original posting.
| Could one of the developers he mentioned please post here an example of a
|hard disk partitioned between PC and Amiga side, and the corresponding
|mountlist?

The "standard" DJMOUNT command doesn't need any mountlist entry.  Also,
I don't think the original DPFORMAT  allows a FFS switch.  At least none
is documented in the original manual for the A2088.
[I just checked with DPFORMAT ? and it does not seem to allow any options, 
unlike FORMAT that accepts FFS among others]

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=