Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!mit-eddie!mit-amt!mit-atrp!ralph
From: ralph@mit-atrp.UUCP (Ralph L. Vinciguerra)
Newsgroups: comp.sys.amiga.tech
Subject: Re: crashing A1000 with accessories
Summary: Gee....me,SBII,A2000,GVP and ST157N too.
Message-ID: <3218@mit-amt>
Date: 26 Oct 88 02:46:16 GMT
References: <8810241551.AA05390@decwrl.dec.com>
Sender: usenet@mit-amt
Reply-To: ralph@atrp.media.mit.edu (Ralph L. Vinciguerra)
Organization: MIT Amiga Users Group c/o MIT Cognitive Info. Processing Group
Lines: 18

That's interesting !
I just hooked up a GVP 2 meg memory/SCSI controller in my A2000
which already had an adapted Starboard II in it.

It seems things run fine with either alone, but with both plugged
in my system becomes pretty unreliable. Most large programs will
crash it easily, but it will run small things for some time.
Also, FastMemFirst, which I used to run in my boot-up really
hauls in the GURU.

The SB II had worked flawlessly in my A1000 and then in my A2000 so
I really don't suspect it.

I've checked the jumpers, gotten the newest scsidev, reordered the
cards in the bus, all with no success. I've been reduced to removing
the SB II to keep the system running with the HD.

I'm open for suggestions too.