Path: utzoo!yunexus!geac!syntron!jtsv16!uunet!cbmvax!andy
From: andy@cbmvax.UUCP (Andy Finkel)
Newsgroups: comp.sys.amiga.tech
Subject: Re: problems (probably) with setpatch
Message-ID: <5110@cbmvax.UUCP>
Date: 26 Oct 88 15:43:30 GMT
Article-I.D.: cbmvax.5110
References: <8810260116.AA27716@cory.Berkeley.EDU>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 31

In article <8810260116.AA27716@cory.Berkeley.EDU> dillon@CORY.BERKELEY.EDU (Matt Dillon) writes:
>
>	With setpatch installed my mouse gets very jerky during compiles and
>the keyboard gets screwed up (like the input device process is hanging for
>long periods of time).  Without setpatch installed everything is O.K.
>
>	Removing DMouse and ConMan does not help the situation.
>
>	Are there specific instructions for installing SetPatch other
>than the obvious?

No...there was a problem with an old SetPatch, that left a Forbid 
on the CLI it was executed from; but that's been long fixed.

You are just running it, right ?  ie

Setpatch

or

Setpatch > NIL:

-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

"I first began to lose faith in software engineering when I found out
 that no two printers were compatible."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.