Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!tektronix!reed!psu-cs!paulm
From: paulm@psu-cs.UUCP (Paul Mauvais)
Newsgroups: comp.sys.att
Subject: 3B2 Floppy Key Problem
Message-ID: <1094@psu-cs.UUCP>
Date: 15 Oct 88 00:08:26 GMT
Distribution: na
Organization: Dept. of Computer Science, Portland State University; Portland OR
Lines: 20

I have a 3B2/300 with 2MB of RAM and an internal 30MB HD

Someone in charge of the 3B2 before me changed the hardware
password to something different from the default, and now
no one knows what.  So, I follow the nifty manual directions
and use my floppy key to reset the NVRAM.  

Nothing.  It resets the date/time just fine, but does nothing
to the hardware/diag password at all.

Any suggestions on what I can do??


                                                                Paul Mauvais
				   Assistant System Programmer/Administrator
LOCAL:  paulm@psu-cs                            Portland State University CS
CSNET:  paulm@cs.pdx.edu                        Portland Center for Advanced
ARPANET:paulm%cs.pdx.edu@relay.cs.net                             Technology
UUCP:   {ucbvax,uunet,gatech}!tektronix!psu-cs!paulm
============================================================================