Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!hplabs!hp-pcd!hpcvlx!kcl
From: kcl@hpcvlx.HP.COM (Ken C. Lo)
Newsgroups: comp.sys.ibm.pc
Subject: Re: ST-225 Dynamic Config Parameters
Message-ID: <101000016@hpcvlx.HP.COM>
Date: 26 Oct 88 17:07:01 GMT
References: <17148@shemp.CS.UCLA.EDU>
Organization: Hewlett-Packard Co., Corvallis, OR, USA
Lines: 8


 The following are the parameters for ST-225 drive:
    Total # of cylinders = 615
    Total # of heads = 4
    Reduced write current = 450
    Write precompensation = 450
    Maximum correctable error burst length = 11
    Command control block option byte = 5