Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!bu-cs!purdue!decwrl!sun!pitstop!sundc!seismo!uunet!mcvax!cernvax!ethz!czychi
From: czychi@ethz.UUCP (Gary Czychi)
Newsgroups: comp.sys.mac
Subject: Changing the Interleave with HD SC SetUp V2.0
Message-ID: <651@ethz.UUCP>
Date: 18 Oct 88 22:25:26 GMT
Organization: ETH Zuerich
Lines: 38

Expires: 
References: 
Sender: 
Reply-To: czychi@bernina.UUCP (Gary Czychi)
Followup-To: 
Distribution: 
Organization: ETH Zuerich, Switzerland
Keywords: Interleave; 5 1/4" harddisk in Mac SE 

Hi there,

this is my first posting to usenet so please forgive if anything goes wrong.

When I first installed my org. HD SC 40 (5.25") into my SE, I formatted it
with an interleave of 1:1, because it was a little bit faster with this
interleave.

Everything is working fine, but today I had to reinitialize it (I have a new
Apple HD SC 80 now) and I *forgot* how to change this dammned interleave
factor. I can't find it, I never wrote it down and I have tried (almost)
everything, but no chance...  So please, could someone tell me once more how
to do it?

Besides, is there anybody interested in "How To" install a 5 1/4" harddisk
into a Mac SE? Apple says no no, but I can proove: yes yes :-)
Please E-mail, if there's enough interest, I will summarize and post.

Thanks a lot for your help,

Gary


        Gary T. Czychi             University of St.Gallen, Switzerland
	  
                CZYCHI@CSGHSG52.BITNET   (also: CSGHSG53)
                CZYCHI@ETHZ.UUCP
		
		        Tel.: --41 / 71 / 28 30 55