Xref: utzoo comp.bugs.4bsd:1068 comp.unix.wizards:12132
Path: utzoo!utgpu!attcan!uunet!mcvax!hp4nl!bsiao!tvdl
From: tvdl@bsiao.UUCP (Timo van der Laan)
Newsgroups: comp.bugs.4bsd,comp.unix.wizards
Subject: Problems with ethernet (Interlan Np100 device)
Keywords: ethernet, np100, bsd43
Message-ID: <496@bsiao.UUCP>
Date: 4 Nov 88 14:58:16 GMT
Reply-To: tvdl@bsiao.UUCP (Timo van der Laan)
Organization: POSTBANK N.V., Amsterdam
Lines: 38

Index:	sys/vaxif/if_np.c if_ix.c 4.3BSD

Description:
	Our ethernet connection with an IBM 9370 regularly generates 
	ixrint errors.  The diagnostic printed on the console says:
	"ixrint: cqe error 1, 106, 0"
	We are certain that this is caused by the VAX as these errors
	also occur when the ethernet is disconnected from the IBM with
	the VAX running single user.

	The real problem is that from time to time it is impossible
	to work with the ethernet connection from the VAX-side.
	In those cases NO packets are put on the ethernet and an ftp
	call (VAX-side) will hang.
	If we then start ftp from the IBM-side the problem disappears.

Configuration:
	VAX11/750 with Interlan Np100 10 Mb/s Ethernet interface
	System BSD4.3.

	Our Interlan device is located at address 0162000.

	(In our configuration file:
	device		np0	at uba? csr 0162000		vector npintr

	Changes in if_np.c:
101c101
< u_short	npstd[] = { 0162000, 0162020, 0 };
---
> u_short	npstd[] = { 0166000, 0166020, 0 };
	)

--
If anyone can help us please reply via mail:

 Timo van der Laan, Postbank N.V., room 4.97             ...mcvax!bsiao!tvdl
 Pb 21009
 1000 EX  AMSTERDAM                                   Phone: + 31 20 5843175