Path: utzoo!attcan!uunet!ubvax!mrspoc!itkin
From: itkin@mrspoc.UUCP (Steven M. List)
Newsgroups: comp.dcom.modems
Subject: 'Blazer lockup at 2400 Baud
Message-ID: <1889@mrspoc.UUCP>
Date: 1 Nov 88 00:55:57 GMT
Reply-To: itkin@mrspoc (Steven List)
Organization: Transact Software, Inc., Mt. View, CA
Lines: 27

I've just connected up my two spanking new 'Blazers and am delighted, overall.
However I seem to have a small problem.  When someone dials in interactively
to my dialin 'Blazer at PEP speeds, there is no problem.  When someone dials
in interactively to the 'Blazer at 2400 baud, there also seems to be no
problem.  When UUCP connects at PEP speeds, no problem.  Now, the problem...

When UUCP connects at 2400 baud, it gets through sending the login ID and,
apparently, password, and then hangs.  I don't really have the option of
making all my low speed connections come in on another number.  Does anyone
have any suggestions?  Here're are the register settings from my 'Blazer:

E0 F1 M1 Q1 P V1 X1     Version BA4.00
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=040 S08=002 S09=006
S10=007 S11=070 S12=050 
S45=255 S47=004 S48=000 S49=000
S50=000 S51=004 S52=001 S53=002 S54=003 S55=003 S56=017 S57=019 S58=003 S59=000
S60=000 S61=045 S62=003 S63=001 S64=000 S65=000 S66=001 S67=001 S68=255 
S90=000 S91=000 S92=001 S95=000 
S100=000 S101=000 S102=000 S104=000 
S110=255 S111=255 S112=001 
S121=000 

Thanks for any help you can offer.
-- 
:  Steven List @ Transact Software, Inc.
:  {coherent,mips,pyramid,satyr,ubvax,wesley}!mrspoc!itkin
:  Voice: (415) 961-6112