Xref: utzoo comp.os.vms:9945 comp.dcom.modems:2903
Path: utzoo!utgpu!attcan!uunet!peregrine!ccicpg!arnold!dave
From: dave@arnold.UUCP (Dave Arnold)
Newsgroups: comp.os.vms,comp.dcom.modems
Subject: Re: VMS modem woes
Message-ID: <232@arnold.UUCP>
Date: 10 Nov 88 15:09:40 GMT
References: <227@arnold.UUCP> <2564@tansei.cc.u-tokyo.JUNET>
Organization: Home, Mission Viejo, Ca
Lines: 14

In article <2564@tansei.cc.u-tokyo.JUNET>, c31293@tansei.cc.u-tokyo.JUNET (Kenji Rikitake) writes:
> 
> TTY_DIALTYPE bit 0 only changes the logout sequence.
> Check VAX/VMS I/O User's Manual Part 1.

No, changing TTY_DIALTYPE to 1 uses CCITT protocol spec.  Basically,
the RING signal is used.  Check VAX/VMS I/O User's Manual Part 1.

I still think VMS should be ignoring anything from the modem unless
DCD is asserted.
-- 
Dave Arnold (dave@arnold.UUCP)
Work: Volt Delta Resources     Phone: (714) 921-7635
Home: 26561 Fresno street,  Mission Viejo, Ca  92691