Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!s55.prime.COM!CUMMINGS
From: CUMMINGS@s55.prime.COM ("Kevin J. Cummings")
Newsgroups: comp.os.cpm
Subject: Re: Morrow S-100 board
Message-ID: <8810310222.AA05904@ucbvax.Berkeley.EDU>
Date: 30 Oct 88 03:26:12 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 19

I don't have any schematics or user manual for your board, but I do have some
BIOS drivers (From a Morrow BIOS) for your board.  It is indeed 3 serial ports,
and Morrow used this board in it's Decision-1 S-100 machines.  Morrow used
Port 1 for CON, Port 2 for RDR/PUN, and Port 3 for LPT (according to the
BIOS source).  I suspect that the 50-pin connector is used for all three
serial ports, but I don't have the pin mappings.

============================================================================
Kevin J. Cummings                       Prime Computer Inc.
20 Briarwood Road                       500 Old Connecticut Path
Framingham, Mass.                       Framingham, Mass.

InterNet:  CUMMINGS@S55.Prime.COM
CSNet:     CUMMINGS%S55.Prime.COM@RELAY.CS.NET
UUCP:      {uunet, csnet-relay}!S55.Prime.COM!CUMMINGS

Std. Disclaimer: "Mr. McKittrick, after careful consideration, I've come
                  to the conclusion that your new defense system SUCKS..."
============================================================================