Path: utzoo!attcan!uunet!cbmvax!andy
From: andy@cbmvax.UUCP (Andy Finkel)
Newsgroups: comp.sys.amiga
Subject: Re: A HD controller review
Message-ID: <5116@cbmvax.UUCP>
Date: 27 Oct 88 16:36:34 GMT
References: <8810201315.AA19782@decwrl.dec.com> <42@sns.UUCP> <13363@cisunx.UUCP>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 17

In article <13363@cisunx.UUCP> ejkst@unix.cis.pittsburgh.edu (Eric J. Kennedy) writes:
>on the drive must be the old filesystem.  Now, is this really true for
>all cases or is it only true for the A2090?  I have a C.LTD SCSI
>controller and hard disk on my A1000, and the FFS appears to work OK,

It's only true if your first partition is automounted.  If you fire
up your hard disk by using the Mount command (rather than binddrivers)
you can make the whole thing ffs.
-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

"I first began to lose faith in software engineering when I found out
 that no two printers were compatible."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.