Path: utzoo!yunexus!geac!syntron!jtsv16!uunet!cbmvax!andy
From: andy@cbmvax.UUCP (Andy Finkel)
Newsgroups: comp.sys.amiga
Subject: Re: FF
Message-ID: <5151@cbmvax.UUCP>
Date: 31 Oct 88 20:32:40 GMT
Article-I.D.: cbmvax.5151
References: <7046@orstcs.CS.ORST.EDU> <3067@amiga.UUCP> <7051@orstcs.CS.ORST.EDU>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 20

In article <7051@orstcs.CS.ORST.EDU> bennete@romana.UUCP (Erik J. Bennett) writes:
>In article <3067@amiga.UUCP> jimm@cloyd.UUCP (Jim Mackraz) writes:
>I loaded both clean 8 and clean 9 into fed. It says that they are fixed width.
>It also says that they are the proper size.  What now?

Resave them, then reboot the machine and try again.

>-Erik
>bennete@romana.cs.orst.edu


-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

"I first began to lose faith in software engineering when I found out
 that no two printers were compatible."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.